Skip to Content
Neotech
  • Home
  • Products
  • Applications
  • Calculators
  • Director's Desk
  • Blog
  • Careers
  • Contact us
  • Sign in
Neotech
      • Home
      • Products
      • Applications
      • Calculators
      • Director's Desk
      • Blog
      • Careers
      • Contact us
    • Sign in
    Home / Products
    Products

    The complete Neotech range

    Steam, thermic fluid, hot air and hot water: six families of process heating, every one designed and built in our own factories at Asangaon. Choose a category, compare the highlights, then open any of 102 individual models.

    01Steam Boilers & Generators10 – 1,000 kg/hr · up to 15 kg/cm²4 products → 02Thermic Fluid Heaters10,000 – 15,00,000 kcal/hr · up to 300 °C3 products → 03Hot Air Generators30,000 – 10,00,000 kcal/hr · up to 400 °C2 products → 04Hot Water & Tank Heating50,000 – 6,00,000 kcal/hr · up to 90 °C2 products → 05Industrial Heat Pumps15 – 270 kW per machine · up to 120 °C1 product → 06Gas, Conversions & Process EquipmentTurnkey · design to commissioning3 products →
    15product families
    102standard models
    10 – 1,000kg/hr steam
    300 °Cthermic fluid
    1991building heat since
    Steam Boilers & GeneratorsThermic Fluid HeatersHot Air GeneratorsHot Water & Tank HeatingIndustrial Heat PumpsGas, Conversions & Process Equipment
    01

    Steam Boilers & Generators

    Coil-type, Non-IBR and fully automatic. No registration, no boiler house, no certified attendant, and full steam pressure within minutes of switching on.

    Range
    10 – 1,000 kg/hr · up to 15 kg/cm²
    Best for
    Jacketed vessels, dyeing, sterilisation, cooking, presses, laundries
    Revotech: Oil Fired Steam Boiler
    Oil Fired Steam BoilerOil

    Revotech

    Non-IBR, four-pass, fully automatic coil-type steam boiler with the Reverse Flue combustion principle.

    • Non-IBR: the coil holds under 25 litres
    • Full steam pressure in 3–5 minutes from cold
    • Four-pass reverse-flue design, 88 % on NCV
    300 – 1000kg/hr steam (F&A 100 °C)
    15 kg/cm²working pressure
    88 ± 2 %efficiency on NCV
    LDO / FO / HSDfuel
    7 models
    RT-03RT-04RT-05RT-06RT-08RT-085RT-10
    Explore RevotechRequest a quote
    Revotech-G: Gas Fired Steam Boiler
    Gas Fired Steam BoilerGas

    Revotech-G

    Packaged non-IBR four-pass steam boiler with an imported, fully automatic gas burner — efficiency in the vicinity of 90 %.

    • Non-IBR, packaged on one base frame
    • Runs on PNG or LPG, or dual fuel
    • About 90 % overall efficiency
    300 – 1000kg/hr steam (F&A 100 °C)
    15 kg/cm²working pressure
    ~90 %overall efficiency
    PNG / LPGfuel
    7 models
    RTG:03RTG:04RTG:05RTG:06RTG:08RTG:085RTG:10
    Explore Revotech-GRequest a quote
    Minimatic: Mini Steam Boiler
    Mini Steam BoilerOilGas

    Minimatic

    Compact three-pass mini steam boiler with imported monoblock burners — ideal for replacing electrically heated steam boilers.

    • Compact, skid-mounted and Non-IBR
    • Three-pass design with a Riello burner
    • Runs on diesel, PNG or LPG
    50 – 200kg/hr steam (F&A 100 °C)
    15 kg/cm²working pressure
    ~90 %efficiency
    HSD / PNG / LPGfuel
    4 models
    Minimatic-50Minimatic-100Minimatic-150Minimatic-200
    Explore MinimaticRequest a quote
    Nanomatic: Mini Steam Generator — Electric / Gas / Oil
    Mini Steam Generator — Electric / Gas / OilElectricGasOil

    Nanomatic

    Extremely compact, portable steam generators for small, regular requirements of dry steam — electric, gas or oil fired.

    • Electric, gas or oil models from 10 kg/hr
    • Extremely compact and portable
    • Low power requirement and low running cost
    10 – 190kg/hr steam
    4 – 6 kg/cm²max. pressure (E 4 · O 5 · G 6)
    ~90 %efficiency (fired)
    Electric / Gas / Oilchoice of energy
    21 models
    NME-10NME-14NME-20NME-30NME-40NME-50NME-60NME-70NME-80+12 more
    Explore NanomaticRequest a quote
    02

    Thermic Fluid Heaters

    High process temperatures at near-atmospheric pressure, on oil, gas, solid fuel or electricity.

    Range
    10,000 – 15,00,000 kcal/hr · up to 300 °C
    Best for
    Reactors, stenters, corrugators, hot-oil presses, fryers
    Neotherm: Oil Fired Thermic Fluid Heater
    Oil Fired Thermic Fluid HeaterOil

    Neotherm

    Vertical, fully automatic thermic fluid heater with four heat-transfer passes — 300 °C at the outlet, 88 % efficiency.

    • Up to 300 °C at near-atmospheric pressure
    • Three-pass design, 88 % efficiency
    • Outside the purview of IBR
    50,000 – 15,00,000kcal/hr
    300 °Cmax operating temperature
    88 %efficiency
    LDO / FOfuel
    9 models
    NT:50NT:100NT:200NT:300NT:400NT:600NT:800NT:1000NT:1500
    Explore NeothermRequest a quote
    Neotherm C: Solid Fuel Fired 3-Pass Thermic Fluid Heater
    Solid Fuel Fired 3-Pass Thermic Fluid HeaterSolid fuel

    Neotherm C

    Coal, wood or briquette fired thermic fluid heater with external furnace and balanced draught — built for low-grade fuels.

    • Runs on coal, wood or briquettes
    • External furnace protects the coil
    • Balanced draught, 76 % with air preheater
    1,00,000 – 10,00,000kcal/hr
    300 °Coutlet temperature
    70 ± 2 %efficiency (76 % with APH)
    Coal / Wood / Briquettefuel
    6 models
    NTC:100NTC:200NTC:300NTC:400NTC:600NTC:1000
    Explore Neotherm CRequest a quote
    Neotherm E: Electrically Heated Thermic Fluid Heater
    Electrically Heated Thermic Fluid HeaterElectric

    Neotherm E

    Skid-mounted electric thermic fluid heating system — 98 % efficient, 280 °C, no chimney, no fuel handling.

    • 98 % efficient, with no chimney or fuel storage
    • Up to 280 °C for pilot plants and small reactors
    • Digital temperature control
    10,000 – 70,000kcal/hr
    280 °Cmax operating temperature
    98 %efficiency
    12 – 84 kWheater rating
    7 models
    NTE:12NTE:24NTE:30NTE:36NTE:48NTE:60NTE:84
    Explore Neotherm ERequest a quote
    03

    Hot Air Generators

    Clean, indirect hot air for drying and curing, fired on oil, gas or low-cost solid fuel.

    Range
    30,000 – 10,00,000 kcal/hr · up to 400 °C
    Best for
    Tray and spray dryers, curing ovens, grain and food drying
    Technodry Block: Oil / Gas Fired Hot Air Generator (TDB I & TDB G)
    Oil / Gas Fired Hot Air Generator (TDB I & TDB G)OilGas

    Technodry Block

    Fully automatic hot air generators delivering clean, uncontaminated hot air for process drying — indirect to 300 °C, direct to 800 °C.

    • Hot air at 150 °C standard, models to 400 °C
    • Oil or gas fired, 88 ± 2 % efficiency
    • Fully automatic, packaged unit
    30,000 – 10,00,000kcal/hr range
    150 °C stdup to 400 °C models
    88 ± 2 %efficiency
    LDO / FO / NG / LPGfuel
    8 models
    TDB 50TDB 100TDB 150TDB 200TDB 300TDB 400TDB 500TDB 600
    Explore Technodry BlockRequest a quote
    Technodry Block SF: Solid Fuel Fired Hot Air Generator
    Solid Fuel Fired Hot Air GeneratorSolid fuel

    Technodry Block SF

    Indirect, fully automatic hot air generator firing wood, coal or agro-briquettes — clean hot air up to 200 °C.

    • Runs on wood, coal or briquettes
    • Air-cooled chamber with no refractory
    • Hot air to 200 °C, higher on request
    3,00,000 – 6,00,000kcal/hr (standard models)
    200 °Chigher on request
    70 ± 2 %efficiency
    Wood / Coal / Briquettefuel
    4 models
    TDB-300 (SF)TDB-400 (SF)TDB-500 (SF)TDB-600 (SF)
    Explore Technodry Block SFRequest a quote
    04

    Hot Water & Tank Heating

    Riello-fired hot water generators and tank heating systems that replace electric immersion heaters.

    Range
    50,000 – 6,00,000 kcal/hr · up to 90 °C
    Best for
    CIP, washing, pretreatment tanks, hotels and hospitals
    Neohydrics: Oil / Gas Fired Hot Water Generator
    Oil / Gas Fired Hot Water GeneratorOilGas

    Neohydrics

    Three-pass hot water generators with imported Italian Riello burners — up to 90 °C, close to 90 % efficient.

    • Hot water up to 90 °C
    • Three-pass design with a Riello burner
    • Compact, skid-mounted, fully automatic
    50,000 – 6,00,000kcal/hr
    90 °Cmax temperature
    ~90 %efficiency
    HSD / NG / LPGfuel
    8 models
    NH 50NH 100NH 150NH 200NH 300NH 400NH 500NH 600
    Explore NeohydricsRequest a quote
    Neo Hot: Oil / Gas Fired Tank Heating System
    Oil / Gas Fired Tank Heating SystemOilGas

    Neo Hot

    Four-pass stainless-steel tank heating system with Riello burner — the efficient replacement for electrically heated pretreatment tanks.

    • Replaces electric immersion heaters on tanks up to 5,000 L
    • Stainless-steel heat exchanger
    • Runs on diesel, LPG or natural gas
    2,500 – 5,000litre tanks
    75 °Ctank temperature
    ~90 %efficiency
    Diesel / LPG / NGfuel
    3 models
    NEO HOT-25NEO HOT-35NEO HOT-50
    Explore Neo HotRequest a quote
    05

    Industrial Heat Pumps

    Hot water for process heat without combustion, using a fraction of the energy of electric or fired heating.

    Range
    15 – 270 kW per machine · up to 120 °C
    Best for
    Process water, CIP, pasteurisation, boiler feed preheating
    Industrial Heat Pumps: 80 °C · 95 °C · 120 °C process heat — by Sunniva
    80 °C · 95 °C · 120 °C process heat — by SunnivaHeat pump

    Industrial Heat Pumps

    Air-source and water-to-water heat pumps that make process hot water to 80, 95 and 120 °C from electricity and free ambient heat — no boiler, no combustion.

    • Process water at 80, 95 or 120 °C
    • No fuel, no flue, no boiler attendant
    • Made in India by Sunniva, our sister company
    15 – 270 kWper machine (80 °C range)
    up to 120 °Coutlet water
    COP 2.2 – 4.23–4× less energy than electric
    Made in IndiaAsangaon, Maharashtra
    18 models
    SE-HT-15USE-HT-19USE-HT-29USE-HT-35USE-HT-38USE-HT-58VSE-HT-70VSE-HT-115VSE-SHT-17U+9 more
    Explore Industrial Heat PumpsRequest a quote
    06

    Gas, Conversions & Process Equipment

    Gas piping, Riello burners and spares, and fabricated process equipment, from the same engineering team.

    Range
    Turnkey · design to commissioning
    Best for
    PNG / LPG networks, oil-to-gas conversions, process plant
    Gas Piping & Installation: PNG / LPG reticulated systems
    PNG / LPG reticulated systemsGas

    Gas Piping & Installation

    Design, liaison, installation and maintenance of PNG and LPG networks for high-rise residential, commercial and industrial projects.

    • Authorised contractor for all CGD companies
    • PNGRB compliant, with third-party inspection
    • Turnkey: liaison, design, installation, maintenance
    Since 2003PNG / LPG specialists
    All CGDsauthorised contractor
    PNGRBcompliant, with TPI
    Turnkeyliaison → commissioning
    Explore Gas Piping & InstallationRequest a quote
    Burner Conversions & Spares: Riello authorised representative since 2001
    Riello authorised representative since 2001GasOil

    Burner Conversions & Spares

    Convert existing boilers, heaters, ovens and dryers to cheaper, cleaner fuels — with Riello burners, Neotech engineering and genuine spares.

    • Riello authorised representative since 2001
    • Oil-to-gas conversions for any make of equipment
    • Genuine spares, oils and pumps from stock
    Since 2001Riello distributor, Western India
    1 / 2-stage& dual-fuel burners
    Any OEMboilers, ovens, dryers
    Sparesoils, chemicals, pumps
    Explore Burner Conversions & SparesRequest a quote
    Process Equipment: Vessels, evaporators, filters & reactors
    Vessels, evaporators, filters & reactors

    Process Equipment

    Storage vessels, multi-effect evaporators, process filters, columns, condensers, reactors and high-pressure vessels — designed, fabricated and delivered turnkey.

    • Vessels, evaporators, filters, columns, condensers
    • Fabricated at our own Vapi unit
    • Built to your specification, delivered turnkey
    Since 2010process equipment division
    Vapifabrication unit
    Turnkeydesign → maintenance
    Custombuilt to your specification
    Explore Process EquipmentRequest a quote
    Not sure which one?

    Let us choose it with you

    01Start from your processPick your industry and process, tell us your goals, and get a ranked proposal with running cost and CO₂.Applications → 02Size it yourselfKnow your steam, kcal/hr or litres per day? The calculators name the model.Calculators → 03Talk to an engineerSend us your duty, fuel and location, and we usually reply within one working day.Contact us →
    How the model numbers work

    Read the code, know the size

    RT / RTGRevotech oil / gas steam boiler; number = steam kg/hr ÷ 100 (RT-05 = 500 kg/hr)
    NME / NM'G' / NM'O'Nanomatic electric / gas / oil; number = steam kg/hr
    NT / NTC / NTENeotherm oil / solid fuel / electric; number = thousand kcal/hr (NT:200 = 2,00,000 kcal/hr); NTE number = kW
    TDB I / TDB G / TDB SFTechnodry Block indirect-oil / gas / solid fuel; number = thousand kcal/hr
    NHI / NHG / NHPI / NHPGNeohydrics oil / gas; P = pressurised; number = thousand kcal/hr
    SE-HT / SHT / UHTSunniva high / super-high / ultra-high temperature heat pump; number ≈ kW
    Before you choose

    Frequently asked

    What does Non-IBR mean?

    Under the Indian Boiler Regulations, a boiler whose steam-generating volume is under 25 litres is outside the Act. Our Revotech, Minimatic and Nanomatic steam boilers are coil-type units below that limit. You don't need IBR registration, annual inspection, a separate boiler house or a certified boiler attendant.

    Steam boiler or thermic fluid heater?

    Choose steam for direct heating, sterilisation, humidification and anything below about 180 °C. A thermic fluid heater gives 250–300 °C at near-atmospheric pressure, which suits reactors, stenters, corrugators and hot-oil presses where steam would need very high pressure.

    Which fuel is cheapest to run?

    It depends on your local prices. Solid fuel is usually cheapest per kcal, then PNG, then LPG or diesel, with electric heaters the most expensive. For hot water up to 80 °C, a heat pump usually beats all of them. The Applications pages compare running cost and CO₂ at your own prices.

    Can you convert my existing boiler to gas?

    Yes. As Riello's authorised representative since 2001, we convert boilers, thermic fluid heaters, ovens and dryers from oil or electricity to PNG or LPG, and we can lay the gas piping as well.

    What do you need from me for a quotation?

    The duty (steam kg/hr, kcal/hr or litres of water per day), the working pressure or temperature, the fuel available at site, and your location. If you only know the process, start from Applications and we will work out the heat load first.

    Model selection

    Not sure which model you need?

    Tell the calculator what you are heating. It works out the heat load, names the Neotech model, and shows what it will cost to run on each fuel.

    Open the calculatorsTalk to an engineer
    01Describe the job
    02It sizes the heat load
    03It names the model & fuel cost
    Neotech Energy Systems Pvt. Ltd.

    End to end heating solutions since 1991. Non-IBR steam boilers, thermic fluid heaters, hot air and hot water generators and industrial heat pumps, designed and built in our own factories at Asangaon.

    ISO 9001:2015Riello authorisedMade in India
    Follow Neotech
    Instagram ↗ Facebook ↗ Google reviews ↗
    Products
    • Steam boilers
    • Thermic fluid heaters
    • Hot air generators
    • Hot water generators
    • Industrial heat pumps
    • Gas piping
    • Burner conversions & spares
    • Process equipment
    • All products →
    Company
    • Sizing calculators
    • Director's Desk
    • Blog
    • Contact us
    • Sunniva Heat Pumps ↗
    Contact
    Office & service centre213, East West Industrial Centre, Safed Pool, Andheri-Kurla Road, Andheri (E), Mumbai 400 072
    +91 22 2859 0678 · +91 22 2859 9235
    FactoryShed No. 15/16/17, Rukma Industrial Estate, Mumbai–Nashik Highway, Village Asangaon, Tal. Shahpur, Dist. Thane 421 601
    +91 98210 28660 · +91 98210 99894
    sales@neotechboilers.com
    Copyright © Neotech Energy Systems Pvt Ltd