Skip to Content
Neotech
  • Home
  • Products
  • Applications
  • Calculators
  • Director's Desk
  • Blog
  • Careers
  • Contact us
  • Sign in
Neotech
      • Home
      • Products
      • Applications
      • Calculators
      • Director's Desk
      • Blog
      • Careers
      • Contact us
    • Sign in
    Home / Products / Steam Boilers & Generators
    Mini Steam Generator — Electric / Gas / Oil

    Nanomatic

    Extremely compact, portable steam generators for small, regular requirements of dry steam — electric, gas or oil fired.

    10 – 190kg/hr steam
    4 – 6 kg/cm²max. pressure (E 4 · O 5 · G 6)
    ~90 %efficiency (fired)
    Electric / Gas / Oilchoice of energy
    Models
    NME-10NME-14NME-20NME-30NME-40NME-50NME-60NME-70NME-80NME-100NME-120NME-140NME-190NM'G'-35NM'G'-50NM'G'-100NM'G'-150NM'O'-35NM'O'-50NM'O'-100NM'O'-150
    Request a quoteSteam load calculatorTechnical data
    Nanomatic Mini Steam Generator — Electric / Gas / Oil
    Features

    Built for the plant floor

    • Extremely compact & portable models
    • Imported 'RIELLO' burner, with reliable components
    • Low power requirement
    • Low operating cost
    • User friendly
    • Minimal maintenance
    • Qualified operator not required
    • Shell & tube design
    • High combustion efficiency
    • Low heat release rate per unit furnace volume
    • Easy conversion to different liquid and gaseous fuels
    • Easy access for inspection and cleaning
    • Fully automatic unit
    • Low system lag and rapid warm up response
    • Outside the purview of IBR
    • High efficiency

    Oil and gas fired

    Neotech's Nanomatic oil and gas steam generators come in four sizes: 35, 50, 100 and 150 kg/hr. They have a compact design and imported world-class monoblock burners, and work at close to 90 % efficiency. They are extremely easy to install and operate, need minimal maintenance, and suit small requirements for dry steam at regular intervals.

    Electrically heated — NM 'E'

    The electrically heated Nanomatic is offered from 10 to 190 kg/hr. Where it is needed, a version with a higher working pressure (up to 6 kg/cm²) is available on demand.

    Applications

    Garment pressing & ironingLaboratoriesCanteens & kitchensHumidificationSterilisationSmall process vessels

    Technical specification — Nanomatic

    Electrically heated — NM 'E'

    ModelSteam O/P
    kg/hr
    Pressure
    kg/cm²
    Heating load
    kW
    Water pump
    hp
    NME-1010461
    NME-1414481
    NME-20204121
    NME-30304181
    NME-40404271
    NME-50504331
    NME-60604391
    NME-70704451
    NME-80804541
    NME-1001004701
    NME-1201204851
    NME-1401404931
    NME-19019041351

    Gas fired — NM 'G'

    ModelSteam O/P
    kg/hr
    Pressure
    kg/cm²
    NG
    m³/hr
    LPG
    kg/hr
    Burner load
    hp
    Water pump
    hp
    NM'G'-353542.520.21
    NM'G'-505043.52.60.21
    NM'G'-100100475.20.21
    NM'G'-150150410.57.80.21

    Oil fired — NM 'O'

    ModelSteam O/P
    kg/hr
    Pressure
    kg/cm²
    Fuel (full load)
    L/hr
    Burner load
    hp
    Water pump
    hp
    NM'O'-353542.750.21
    NM'O'-505043.60.21
    NM'O'-10010047.20.21
    NM'O'-150150410.80.21

    • Electric supply: AC 3 phase 415 V ± 6%, 50 Hz ± 3%, 4 wire system. Single-phase option available for gas and oil fired models.

    • Higher working pressure (up to 6 kg/cm²) available on demand.

    Scope of supply

    What comes with every unit

    The standard supply package, the controls and safeties fitted as standard, and what we need at site, as listed in Neotech's scope of supply.

    Standard scope
    • Complete Steam Generator in shell & tube design and having multiple passes on flue gas side for better heat transfer.
    • One burner assembly of monoblock design and suitable for LPG/NG firing. The Burner will be supplied with total controls for fully automatic operation and safeties for totally safe operation, along with gas train.
    • Completely pre-wired Control Panel with pan-alarm system centralised, indicators for pressure and temperature readings.
    • Necessary controls like temperature controllers, pressure switches, overload relays, etc. with internal wiring.
    • Internal piping mounting & fittings like outlet valves, safety valve, inlet valves, drain valve, etc.
    Battery limits
    Fuel
    • Inlet of Gas Burner.
    Water
    • Suction of water pump.
    Steam
    • Outlet of Steam Generator.
    Electrical
    • Terminal connections in control panel.
    Air & Flue Gas
    • Suction of blower.
    • Flue gas outlet on heater body.
    Standard scope
    • Complete Steam Generator in shell & tube design and having multiple passes on flue gas side for better heat transfer.
    • One burner assembly of monoblock design and suitable for diesel firing. The Burner will be supplied with total controls for fully automatic operation and safeties for totally safe operation.
    • Complete pre-wired Control Panel with pan-alarm system centralised, indicators for pressure and temperature readings. Necessary controls like temperature controllers, pressure switches, overload relays, etc. with internal wiring.
    • Centrifugal type Air cooled Pump set with TEFC motor with internal piping mounting & fittings like outlet valves, safety valve, inlet valves, drain valve, etc.
    Battery limits
    Water
    • Suction of water pump.
    Steam
    • Outlet of Steam Generator.
    Electrical
    • Terminal connections in control panel.
    Air & Flue Gas
    • Suction of blower.
    • Flue gas outlet on heater body.

    Site requirements

    Performance criteria
    Fuel — Light Diesel Oil (LDO) / High Speed Diesel (HSD)
    Filtration120 Mesh — free of water and sediment
    Net Calorific Value (NCV)10,200 Kcal/kg
    Viscosity @ 37.8°CAs per IS specification
    Feed Water Quality
    Hardness< 5 ppm
    Dissolved O₂Nil
    pH Value8.5 – 9.5
    Free CO₂Nil
    Bound CO₂< 5 ppm
    TDS400 ppm max.
    Temperature30°C max.
    ConditionFiltered, free from sediment and turbidity
    Electrical Power Supply
    Voltage415 V ± 6%
    Frequency50 Hz ± 3%
    PhasesThree-phase + Neutral
    EarthingYes — double earthing required
    Standard scope
    • Complete Steam Generator Made from M.S. Plates of heavy duty steel materials, with matching mounting arrangement for electrical heaters, provisions for requisite mounting & fittings.
    • The steam generator will be fitted in a powder coated sheet metal casing for safety & aesthetics.
    • One Set of Electrical Heaters made from S.S. Tubes & Swaged quality for better life.
    • One of Monoblock pump for water feeding.
    • Complete pre-wired Control Panel with pan-alarm system centralized, indicators for pressure and temperature readings.
    • Necessary controls like temperature controllers, pressure switches, overload relays, etc. with internal wiring.
    • Internal piping mounting & fittings like outlet valves, safety valve, inlet valves, drain valve etc.
    Battery limits
    Water
    • Suction of water pump.
    Steam
    • Outlet of Steam Generator.
    Electrical
    • Terminal connections in control panel.

    Site requirements

    Performance criteria
    Sr. No.ParameterDetails
    1Feed WaterFiltered, free from sediment and turbidity, clear water
    2Hardness< 5 ppm
    3O2 ContentNil
    4PH Value8.5 – 9.5
    5Free CO2Nil
    6Bound CO2< 5 ppm
    7TDS400 ppm Max.
    8Temperature30 Max.
    Electric power supply
    Voltage415 V ± 6%
    Frequency50 HZ ± 3%
    PhasesThree + Neutral
    EarthingYes, double.
    Enquiry

    Get a quotation for Nanomatic

    Tell us the duty, the fuel available and your location. An engineer will call back with a selection and a price, usually within one working day.

    • Office: +91 22 2859 0678
    • Factory: +91 98210 28660
    • sales@neotechboilers.com

    Related

    You may also need

    Minimatic — Mini Steam Boiler
    OilGas

    Minimatic

    Mini Steam Boiler
    Compact three-pass mini steam boiler with imported monoblock burners — ideal for replacing electrically heated steam boilers.

    50 – 200kg/hr steam (F&A 100 °C)
    15 kg/cm²working pressure
    Neotherm E — Electrically Heated Thermic Fluid Heater
    Electric

    Neotherm E

    Electrically Heated Thermic Fluid Heater
    Skid-mounted electric thermic fluid heating system — 98 % efficient, 280 °C, no chimney, no fuel handling.

    10,000 – 70,000kcal/hr
    280 °Cmax operating temperature
    Revotech-G — Gas Fired Steam Boiler
    Gas

    Revotech-G

    Gas Fired Steam Boiler
    Packaged non-IBR four-pass steam boiler with an imported, fully automatic gas burner — efficiency in the vicinity of 90 %.

    300 – 1000kg/hr steam (F&A 100 °C)
    15 kg/cm²working pressure
    Neotech Energy Systems Pvt. Ltd.

    End to end heating solutions since 1991. Non-IBR steam boilers, thermic fluid heaters, hot air and hot water generators and industrial heat pumps, designed and built in our own factories at Asangaon.

    ISO 9001:2015Riello authorisedMade in India
    Follow Neotech
    Instagram ↗ Facebook ↗ Google reviews ↗
    Products
    • Steam boilers
    • Thermic fluid heaters
    • Hot air generators
    • Hot water generators
    • Industrial heat pumps
    • Gas piping
    • Burner conversions & spares
    • Process equipment
    • All products →
    Company
    • Sizing calculators
    • Director's Desk
    • Blog
    • Contact us
    • Sunniva Heat Pumps ↗
    Contact
    Office & service centre213, East West Industrial Centre, Safed Pool, Andheri-Kurla Road, Andheri (E), Mumbai 400 072
    +91 22 2859 0678 · +91 22 2859 9235
    FactoryShed No. 15/16/17, Rukma Industrial Estate, Mumbai–Nashik Highway, Village Asangaon, Tal. Shahpur, Dist. Thane 421 601
    +91 98210 28660 · +91 98210 99894
    sales@neotechboilers.com
    Copyright © Neotech Energy Systems Pvt Ltd